ECI: go to 192.168.1.1 for net info with user: admin (Bezeqwow)
RAID: (gigabyte server board)
Crtl+A
raid 0-stripe set-makes 1 big disk from 2 disks
\ no init -creates array without initialization
\ *migrate -creates raid 0 from single drive
raid 1 -quick:creates array without initialization
\ *clear -writes zeroes to all the array members
\ *build -copies data from source drive to target drive
\ than u select the source drive
EDIMAX+alcatel: http://192.168.8.1 ,configure pppoe, llc,8,48
virtual servers: 80,22,25,110,3389(Not port forwarding-u wont
surf atherwize)
EDIMAX WIRELESS+ ALCATEL OLD SPEED TOUCH PPTP:
general setup wan
wan interface:
ip: 10.200.1.1 255.0.0.0
gw: 0.0.0.0
pptp settings: pptp gw: 10.0.0.138
WIZE LINK: 1-4 with dialer inside -bad connection!
at http://10.0.0.2 login :admin (conexant) (1 port:epicrouter)
at the wan configuration:per vc settings: VPI:8 VCI: 48
mac spoofing: enabled
ATM | service category : CBR
ENCAPSULATION: PPPoE LLC -4 port (1 port: PPPoA VC-Mux)
BRIGE | disabled
IGMP | enabled
disconnect timeout 120
PPP |Service name, Username ronen-s1@IActcom , password *****
Authentication: Auto
check the automatic Reconnect
at Misc Configuration check that PPP reconect on WAN access
ENABLED push SUBMIT
save configuration (device makes reboot)
|