NLMs:
load servman
load netsync.nlm --> connect 4.11 to 3.12 (unload)
netsync.loc is at: sys:system\netsync
load pserver pp_serv --> print server
(4x+3x)load remote.nlm (password ), load rspx -->
for remote adminisration.
at station: rconsole, choose spx, server_name (password)
and u r at the server to exit: unload rspx.
load dsrepair --> checks sytem, do it if u have a slow
server,a few times until no errors
load vrepair --> 3x
load monitor --> who is connected.(connection info,
active connection, delete --> disconnect the user)
load install --> manage server: disk options,volume option,
copy files, load sbackup --> for backup and restore
nds, product, server, licence
load long --> enable long file names,u must add at the console:
add name space long to volume SYS , logoff+on
load inetcfg --> to manage protocoles & net cards
load dsmerge --> to merge between two trees
load conlog --> writes a log at sys:etc\console.log
load keyb --> change the keyboard
SET COMMANDS ON SERVER:
set nwlanuage = english
set timesync = on /off (timesync.cfg)
set dstrace = on /off --> to log problems
set garbage collection = 66
set allow invalid pointers = on
set allow unencrypted passwords = on
set alloc memory check flag = on
set dirty disk cache delay time = 5
set minimum file cache buffers (20-2000)
set read ahead enabled = on
set compression daily check stop hour = 13
starting hour =16
set enable file compression = on
(set number of trees garbage collection
set deleted file compression option = on)
setting time:
set time wednesday, May 1, 2002 11:55:00 am UTC --> to set
time on server than u might get error like: Time is not
synchronized to the network..time sinchronization is active...
and every 15 minutes: Synthetic time is being issued on
partition "ros".U should load dsrepair -a, advanced
option menu, replica and partition operation, repair time
stamp and repair new epoch.it should prompt for name
and pasword. give him the long name like: admin.ros.
otherwize u will c error: "Unable to find object, error :-601"
You can tell a single station not to take the time from the
server by right clicking on network neberhood properties,
than in advanced properties tab combo box tell set station
time --> off
|